•
RGB Full
•
RGB Limited
•
YUV
•
REC709
•
REC601
4. To confirm the selection, press ENTER.
Adjusting the image sharpness
Adjust the edge clarity of the image.
1. Select Menu > Image Settings > Detail.
2. Select the sharpness:
•
Maximum
•
High
•
Normal
•
Low
•
Minimum
3. To confirm the selection, press ENTER.
Setting up 3D display
Use the functions in 3D Display menu to make the timing adjustment and environment necessary
for displaying 3D images.
Setting 3D format
Set up the 3D format according to the 3D input signal.
1. Select Menu > Image Settings > 3D Display > 3D Enable.
2. Select the appropriate 3D format:
•
Auto
•
Frame Packing
•
Side by Side
•
Top and Bottom
•
Frame Sequential
•
Off
3. To confirm the selection, press ENTER.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
34