Adjusting The Image Sharpness; Creating A Seamless Image With Edge Blending; Adding Edge Blends To The Projector; Enabling Basic Edge Blending - Christie Mirage 4K40-RGB User Manual

Adjusting the image sharpness

Change the sharpness of the image.
Lower settings can improve a noisy signal. Setting the sharpness above the halfway point can
introduce noise in the image.
1. Select MENU > Image Settings > Advanced Image Settings > Sharpness.
2. Select Enter.
3. Use the right and left arrows to adjust the sharpness of the image.
4. To confirm your selection, select Enter.

Creating a seamless image with edge blending

Combine several projected images into one single, seamless image with edge blending.

Adding edge blends to the projector

Use Christie or to create edge blends and upload them to Mirage 4K40-RGB.
1. Create an edge blend file using the Christie or application.
To connect Mirage 4K40-RGB with Christie or , use port 3003.
Christie Twist Premium, Twist Pro, and offer advanced warping options. Refer to the Christie
website (www.christiedigital.com) for product information and documentation.
2. Upload the edge blend file to the projector.
3. On one projector, select MENU > Configuration > Edge Blending.
4. Select the appropriate edge blend setting and select Enter.
5. Repeat steps 2 to 4 for the remaining projectors.
6. To turn off edge blending, from MENU > Configuration > Edge Blending, select Off.

Enabling basic edge blending

Create basic edge blends directly on Mirage 4K40-RGB.
1. Start with two projectors and display the full white field test pattern from both.
2. On one projector, select MENU > Configuration > Edge Blending.
3. To enable basic edge blending, select Basic.
4. To edit blending adjustments, select Edge Blend Widths.
5. From the Basic Blending dialog, select a side to blend.
6. To make the blending adjustments, use the arrow keys to change either the vertical and
horizontal values as appropriate.
7. To accept the selection, select Enter.
8. Repeat steps 4 to 6 to blend the remaining sides.
9. When all adjustments are made, use the arrow keys to highlight Apply and select Enter.
10. Repeat steps 2 to 9 for the remaining projectors.
Mirage 4K40-RGB User Guide
020-103015-05 Rev. 1 (04-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Adjusting the image
28