SATO M84PRO Service Manual page 46

Section 5: Printer Configuration
LCD DISPLAY
CALENDAR
00/00/00 00:00
IGNORE CR/LF
YES NO
CHARACTER PITCH
PROP FIXED
ADVANCED MODE
The Card Mode is entered from the Advanced Mode display. The Card Mode allows the operator to
manage the Expanded Memory (PCMCIA Card or Internal Expanded Flash ROM).
LCD DISPLAY
V 05.00.03.00
INITIALIZING
ADVANCED MODE
CARD MODE
M84Pro Service Manual
1. Year - Press the LINE key to increase and the FEED key to decrease the
character value to the desired option. The first display shown will have the
cursor over the two digit year selection. Press the Enter key to select the
option and advance to the Month position.
2. Month - Press the LINE key to increase and the FEED key to decrease
the character value to the desired option. Press the Enter key to select the
option and advance to the Day position.
3. Day - Press the LINE key to increase and the FEED key to decrease the
character value to the desired option. Press the Enter key to select the
option and advance to the Hour position.
4. Hour - Press the LINE key to increase and the FEED key to decrease the
character value to the desired option. The entry must coorespond with a
24 hour day. Press the Enter key to select the option and advance to the
Hour position.
5. Minute - Press the LINE key to increase and the FEED key to decrease
the character value to the desired option. Press the Enter key to select the
option and advance to the Ignore CR/LF display.
This selection tells the printer to strip out all carriage return/line feed pairs
(CR/LF ) from the data stream, including graphics and 2D bar codes. It is used
primrily to maintain compatibility with earlier models of SATO printers.
1. Use the LINE key to step the cursor to either the YES or NO option.
2. Press the FEED key to select the option and advance to the Character
Pitch display.
This selection allows the default character pitch to either be set for fixed
character spacing or proportional character spacing.
1. Use the LINE key to step the cursor to the desired option.
2. Press the FEED key to select the option and advance to the Advanced
Mode display.
To exit the Advanced mode, power the printer off and then back on.
CARD MODE
Displays the firmware during the initialization.
The Card Mode is entered from the Advanced Mode display by pressing the
right LINE key once.
The Card Mode display indicates that the printer is in the Card Mode. To
advance to the first selection, press the FEED key.
PN 9001111A
DEFINITION
DEFINITION
Page 5-13