Adjustment Procedures - SATO M84PRO Service Manual

ADJUSTMENT PROCEDURES

The SATO M84pro Printer incorporates a series of sub-assemblies that, in conjunction, comprise
the total printer assembly. Many of these sub-assemblies are designed to be adjustable to
maintain optimum performance of the printer throughout its life. This service manual section
addresses the proper technique for their adjustment.
It may be necessary to refer to this section following component replacement. Use the relative
procedures in that section to replace the component, test cycle the printer, and then adjust as
necessary in accordance to the relative procedures in this section.
NOTE: Refer to Figure 10-6, Print Position Reference and Figures 10-7
through 10-19, Print Operation Sequence in the Diagrams & Schematics
section for additional operational data as deemed necessary.
M84Pro Service Manual
Figure 8-1, Print Defects
PN: 9001111A
8
Page 8-1