SATO M84PRO Service Manual page 37

Section 5: Printer Configuration
Receive Buffer Selection(DSW2-5): Selects the operating mode of the receive buffer. Refer to
the Interface Specifications section of this manual for more information.
DSW2-5
Off
On
If a 10/100BaseT LAN card is installed, DS2-5 has the following definitions:
DSW2-5 SETTING
Off ENQ Response
On Periodic Response
Firmware Download (DSW2-6): Places the printer in the Firmware Download mode for
downloading new firmware into flash ROM.
DSW2-6 SETTING
Off Disabled
On Enabled
Protocol Code Selection (DSW2-7): Selects the command codes used for protocol control.
Refer to the Selecting Protocol Control Codes section of the Technical Reference manual for
additional information.
.
DSW2-7 SETTING
Off Standard
On Non-Std
M84Pro Service Manual
SETTING
Single Job
Multi Job
DSW2
ON
OFF
DSW2
ON
OFF
PN: 9001111A
DSW2
ON
OFF
1 2 3 4
1 2 3 4 5 6 7
1 2 3 4 5 6 7
5 6 7 8
8
8
Page 5-4