Technical Specifications; General Specifications - Siemens Simatic IPC647C Operating Instructions Manual

Technical specifications

14.1

General specifications

General specifications
Order number
Dimensions
Weight
Supply voltage (V
Input current AC
Line voltage frequency
Transient voltage interruption
Power consumption
Power loss / heat emission
Current delivery (DC)
Noise emission
Degree of protection
Dust protection
Safety
Protection class
Safety regulations
Electromagnetic compatibility (EMC)
Radiated interference
Noise immunity: Mains borne
disturbance variables on supply lines
Noise immunity on signal lines
Immunity to discharge of static
electricity
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
6AG4112-1...(for details, refer to the ordering documentation)
430.4 x 88.1 x 444.4 (W x H x D in mm). Detailed dimensional
specifications can be found in the
device (Page
Min. 10 kg, max. 14 kg
) 100 to 240 VAC (-15 %, 10 %), varying voltage; with transient
N
power failure backup in accordance with NAMUR:
Continuous current up to 6 A (up to 30 A for 5 ms at startup)
50 to 60 Hz (min. 47 Hz to max. 63 Hz, sinusoidal)
Min. 20 ms at 93 V
(max. 10 events per hour; recovery time at least 1 s)
Approx. 210 W maximum at 80% efficiency
210 W = 210 J/s = 0,20 BTU/s
+5 V/30 A +3.3 V/28 A, max. accumulated power 160 W
+12 V/15 A -12 V/0.5 A -5 V/0.5 A +5 Vaux/2 A
Accumulated power of all voltages max. 170 W
< 45 dB(A) at 25 °C to DIN EN ISO 7779
ODDs not in operation
IP41 at the front and IP20 at the rear to IEC 60529
With closed front panel
Filter class G2 EN 779, 99% of particles > 0.5 mm are filtered
Protection class I according to IEC 61140




EN 61000-6-3, FCC class A
EN 61000-3-2 class D and EN 61000-3-3
± 2 kV (to IEC 61000-4-4; Burst)
± 1 kV (to IEC 61000-4-5; Surge symm.)
± 2 kV (to IEC 61000-4-5; Surge asymm.)
± 1 kV (to IEC 61000-4-4; Burst; Length < 30 m)
± 2 kV (to IEC 61000-4-4; Burst; Length > 30 m)
± 2 kV (to IEC 61000-4-5; Length > 30 m)
± 6 kV contact discharge (to IEC 61000-4-2)
± 8 kV air discharge (according to IEC 61000-4-2)
1 43) section.
3
IEC 60950-1
EN 60950-1
UL 60950-1
CSA C22.2 No 60950-1-07
14
D imensional drawing of the
8
135