Siemens Simatic IPC647C Operating Instructions Manual page 23

Layout of the interfaces on the rear of the device
Item Designation
①
PROFINET
PROFIBUS/MPI
②
USB
③
ETHERNET 1, 2 *
④
COM
⑤
LPT
⑥
DP (Display Port)
⑦
KEYBOARD
⑧
MOUSE
⑨
DVI-I
⑩
Audio (input)
⑪
Audio (output)
⑫
DVI-D
⑬
VGA
⑭
DP
⑮
Connecting potentials
* LAN interfaces are numbered on the enclosure to provide unique identification. The numbering by the operating
system may deviate from this.
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
Description
CP 1616 onboard interface, three RJ-45 jacks (optional product version)
PROFIBUS interface (RS 485, electrically isolated), 9-pin D-sub socket (optional
product characteristic)
USB device connectors. USB ports 1 to 4
2 x RJ-45 connectors, Ethernet 10/100/1000 Mbps
Serial interface (V.24), 9-pin sub D plug
Parallel interface, 25-pin
2 x display port, DP connection of Dual Head graphics card (optional)
Connection for a PS/2 keyboard
Connection for a PS/2 mouse
DVI/VGA connection for CRT or LCD monitor with DVI interface
VGA via DVI/VGA adapter
Connection for analog audio source, microphone, 3.5 mm phono jack
Connection for active speakers or headset, 3.5 mm phono jack
DVI-D connection of the DP adapter
VGA connection of the DP adapter
Display port connection of the DP adapter at Dual Head graphics card (optional)
Connection for equipotential bonding
Description
3.6 Installation
23