16.5.2
Starting BIOS Setup
Starting BIOS Setup
Start the setup program as follows:
50. Reset the device (warm or cold restart).
51. Press the F2 key while the BIOS prompt appears on the screen.
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
In the figures shown, the default settings differ based on the device versions. With the
default setting of the Box PC, the display shown below appears following power-on, for
example:
On completion of the POST, the BIOS gives you the opportunity of starting the SETUP
program. The following message appears on the screen:
–
Press F2 go to Setup Utility
–
Press F12 go to Boot Manager
Detailed descriptions
16.5 BIOS Setup
179