Drive Racks And Storage Media; Overview - Siemens Simatic IPC647C Operating Instructions Manual

Expansions and parameter assignment

10.4 Drive racks and storage media

Notes on the allocation of resources
Only two exclusive interrupts are available for PCI /PCIe modules due to the large functional
scope of the motherboard. If the new expansion modules require additional exclusive
resources, you need to disable some functions on the motherboard. For information on
allocated resources, refer to the section
disabling motherboard functions is available in the
information on the assignment of the PCI IRQ line to the PCI slot in the sections
menu (Page
The device supports graphics modules with expansion ROM of up to 48 K.
10.4 Drive racks and storage media
10.4.1

Overview

Drives and storage media
You can mount the following drives and media In the drive racks:
● Hard disk drive (HDD)
● Solid-State Drive (SSD)
● Card rack for Compact Flash Card (CF memory card)
● DVD drive
78
1 82) and B us boards (Page
2 4
S ystem resources (Page
4
B IOS Setup (Page
4
1 67).
2
Operating Instructions, 12/2010, A5E02669337-02
1 73). Information on
2
1 78). You can find
2
A dvanced
4
SIMATIC IPC647C