Installing The Burner Software; Installing Updates; Updating The Operating System; Installing Or Updating Application Programs And Drivers - Siemens Simatic IPC647C Operating Instructions Manual

Service and maintenance
11.2 Reinstalling the software
11.2.8

Installing the burner software

You can find information on installing the burner software on the supplied CD and in the
section
11.2.9

Installing updates

11.2.9.1

Updating the operating system

Windows
The latest updates for Windows operating systems are available on the Internet at:
Microsoft Side Guide (
NOTICE
Before you install new drivers or operating system updates for Windows MUI versions, set
the default language to US English in the regional settings for menus and dialogs.
Other operating systems
Contact the corresponding manufacturer.
11.2.9.2

Installing or updating application programs and drivers

Install and connect an appropriate drive in order to install software from a CD and / or floppy
disk in Windows XP Professional.
The USB floppy disk and CD-ROM drivers are included in Windows and do not have to be
installed from other sources.
For information about installation of SIMATIC software packages, refer to the corresponding
manufacturer documentation.
Contact the manufacturer to obtain updates of drivers and application programs you
purchased from third-party vendors.
NOTICE
Before you install new drivers or operating system updates for Windows MUI versions, set
the default language to US English in the regional settings for menus and dialogs.
118
D VD burner (Page 4 4).
7 3
h ttp://www.microsoft.com)
7
Operating Instructions, 12/2010, A5E02669337-02
SIMATIC IPC647C