Replacing The Cpu Cooler - Siemens Simatic IPC647C Operating Instructions Manual

11.1.10

Replacing the CPU cooler

The CPU cooler installed in the SIMATIC IPC647C uses heat pipes and an additional heat
exchanger.
CAUTION
The CPU cooler may only be removed by authorized technical personnel. Information about
original spare parts for SIMATIC PCs is available on the Internet at: After-sales information
system for SIMATIC PC/PG (
Preparation
1. Disconnect the device from the mains.
2. Open the device.
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
11.1 Removing and installing hardware components
h ttp://www.siemens.com/asis)
7
Service and maintenance
107