Installation And Removal Of Cf Card Rack - Siemens Simatic IPC647C Operating Instructions Manual

Vibration damped drive rack: Installing a HDD directly in the drive rack
Steps for mounting an HDD
1.
2.
3.
4.
Vibration damped drive rack: Removing the HDD for the drive rack
Perform the tasks describe above in reverse order.
10.4.5

Installation and removal of CF card rack

CF card rack in the drive rack
You can install and remove CF card racks in the following drive racks:
● Vibration damped drive rack
● Drive rack for a removable rack
Preparations
9. If necessary, remove the CF card from the CF card rack.
10. Remove the drive rack from the device as described in the section
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
Push the HDD into the drive rack.
Secure the HDD to the drive rack
with two screws on the right and
two on the left.
Connect the power and data cables
to the HDD.
Install the drive bay again.
removal of drive racks (Page
Expansions and parameter assignment
8 0).
2
10.4 Drive racks and storage media
I nstallation and
5
85