Siemens Simatic IPC647C Operating Instructions Manual page 28

Application planning
4.2 Unpacking and checking the delivery unit
Noting down the device identification data
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the following data in the table below:
● Serial number: The serial number (S VP) is located on the rating plate inside the front
● Order number of the device
● Ethernet address: The Ethernet address of the device is printed on the device and is
● Microsoft Windows "Product Key" on the "Certificate of Authenticity" (COA). The COA
Serial number
Order no.
Microsoft Windows Product Key
Ethernet 1 address
Ethernet 2 address
CP 1616 onboard layer 2
28
door.
Figure 4-1 Rating plate IPC647C
The KCC label (1) is visible when the device has been approved for Korea.
stored in the BIOS Setup (F2 key) under "Advanced > Peripheral Configuration".
label is located on the inner side of the front door. The product key is always required to
reinstall the operating system. The Windows XP operating system is installed on the
device shown here with the COA label.
Figure 4-2 COA label
S VP ...
6AG4112-1 ...
Operating Instructions, 12/2010, A5E02669337-02
SIMATIC IPC647C