Boot Menu - Siemens Simatic IPC647C Operating Instructions Manual

16.5.9

Boot Menu

In this menu this booting behavior of the device is specified and the boot medium or
sequence of the boot media is determined.
Figure 16-18 Boot Menu
Entry
UEFI Boot
Quick Boot
Quiet Boot
POST errors
NumLOCK
USB Boot
Ethernet 1 Remote Boot
Ethernet 2 Remote Boot
EFI>
Legacy>
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
Meaning
Enable or disable the UEFI Boot functionality.
Enable or disable
If enabled, the programming device starts faster because various
hardware function tests are skipped.
Booting is carried out in text mode.
Specification of the booting behavior if errors are recognized.
Never halt on errors: Continue the booting process when errors occur.

Halt on all errors: Interrupt the booting process when errors occur.

All Without keyboard: Interrupt the booting process when errors occur,

except for keyboard errors.
All without kb/smart: Interrupt the booting process when errors occur,

except for keyboard and S.M.A.R.T errors. (SMART: Self-Monitoring,
Analysis and Reporting Technology)
On = Enable numeric keypad on right
Off = Disable numeric keypad on right (= navigation)
Allow/Do not allow booting of inserted USB devices.
Enable or disable booting of the LAN1.
Enable or disable booting of the LAN2.
Set order of the EFI boot media
Set traditional boot order (Normal, Advanced, Advanced Placeholder)
Detailed descriptions
16.5 BIOS Setup
195