Siemens Simatic IPC647C Operating Instructions Manual page 81

How to remove the drive rack
4.
5.
Installing the driver carrier
Perform the tasks describe above in reverse order.
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
Loosen the latch for the
SATA connector by pressing
the angled SATA connector
lightly and pull it from the
motherboard.
Remove the drive rack out of
the device.
The drive rack is removed from the device.
Expansions and parameter assignment
10.4 Drive racks and storage media
81