Expansions And Parameter Assignment; Open The Device - Siemens Simatic IPC647C Operating Instructions Manual

Expansions and parameter assignment

10.1

Open the device.

CAUTION
Only authorized technical personnel are allowed to carry out any work on the open device.
You may only install memory modules and expansion cards to expand the hardware within
the warranty period.
The device contains electronic components which may be destroyed by electrostatic
charge.
Take appropriate precautionary measures before you open the device. Refer to the ESD
guidelines on handling electrostatically sensitive components (
Tools
You can mount all components using TORX T6, T10 and T20 screwdrivers and a 4.5-mm
hex key (for the interface interlock on the rear panel.)
Preparation
Disconnect the device from the mains.
Unauthorized opening of device without previously disconnecting power may result in
substantial damage to equipment and/or danger to the user.
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
CAUTION
WARNING
10
E SD guidelines (Page
3
2 21)).
2
65