Removing The Op - Siemens Simatic IPC647C Operating Instructions Manual

Service and maintenance
11.1 Removing and installing hardware components
11.1.8

Removing the OP

Preparation
16. Disconnect the device from the power supply and remove all connecting cables from the
17. Open the device.
Removing the operator panel
How to remove the operator panel
1. Remove the bus frame as described
2. Remove the CPU cooler as described
3. Loosen the screws
104
device.
in the section I nstallation and removal
6
of the bus frame (Page 7 1).
3
in the section R eplacing the CPU
6
③
cooler (Page 1 07) .
3
①
on the
②
traverse .
–
–
1
Operating Instructions, 12/2010, A5E02669337-02
2 3
SIMATIC IPC647C