Table of Contents
Advertisement
[Detailed description]
Table Detailed description of hfcmgr –sfp
No.
Item of display
1
Device
2
WWPN
3
Status
5
SFP Part Number
6
SFP Serial Number
7
SFP Date Code
8
Transceiver Replacement
[Error Messages]
(a) Firmware does not support SFP transceiver hot-swap.
Device:hfcldd0
WWPN:5000087000572574
This Firmware version does not support hot swap feature of SFP Transceiver.
<Solution>Update firmware of the adapter
(b) SFP is not plugged or SFP is not embedded (Mezzanine card or embedded FC-
Switch)
Device:hfcldd1
WWPN:5000087000572640
SFP Part Number
Serial Number : N/A
Date Code
Transceiver Replacement : not replaceable
<Solution> Confirm whether SFP is plugged.
(c) SFP information is not displayed correctly.
Device:hfcldd2
WWPN:5000087000572642
SFP Part Number
Serial Number : incorrect data
Date Code
Transceiver Replacement : not replaceable
<Solution> SFP may be damaged. Replace SFP transceiver.
Description
Logical device name
World Wide Port Name
Port Status
LinkUp:
LinkDown:
WaitLinkUp:
after Linkdown is detected.
Isolate(C ):
Isolate(SFPFail) : SFP failure is detected.
Isolate(SFPNotSupport):
Unsupported SFP is plugged.
Isolate(SFPDown): SFP is not plugged.
Isolate(CHK-STOP): Adapter is check-stop state.
SFP Parts Number
SFP Serial Number
SFP Date Code
Not replaceable : SFP is not hot-replaceable
Replaceable
You can replace SFP only when port status is
Isolate(C) or Isolate(CHK-STP).
Status:LinkDown
Status:Isolate(SFPDown)
: N/A
: N/A
Status:Isolate(SFPFail)
: incorrect data(xxxxxxxx)
: incorrect data
75
Normal state
FC cable is not plugged.
Waiting to Linkup
Isolated by executing command.
: SFP is hot-replaceable
Advertisement
Table of Contents
