Table of Contents
Advertisement
[Detailed description]
Table Detailed description of hfcmgr –g
(Windows/Linux, higher than or equal to hfcmgr version 8.0)
Item of display
Server information
HostName
OS Type
OS Version
Driver Version
hfcmgr Version
Adapter information
Model
Parts Number
Firmware
ECID
WWPN
Device
Location
[LinkStatus]
Virtual Fibre Channel
Information
vport
WWPN
[LinkStatus]
*1) If the embedded FC switch module is used in Hitachi Compute Blade 320 or Hitachi
Compute Blade 2000, the model name may be displayed as 'Unknown Model'.
*2)
<Windows>
not displayed.
Description
Host name
OS type *2
OS version *2
Driver version
hfcmgr (API) version
This section is displayed for all adapters.
Model name *1
Parts number
Firmware version
Exclusive Chip ID (LSI Serial ID number):
Displayed if 16G Fibre Channel adapter is used.
World Wide Port Name
Logical device name
Bus/Dev/Func
Port state
LinkUp
LinkDown
WaitLinkUp
Isolate(C )
Isolate(SFPFail)
Isolate
(SFPNotSupport)
Isolate(SFPDown)
Isolate(CHK-STP)
This information will be displayed only if a Virtual
Fibre Channel is created.
Number to identify Virtual Fibre Channel Ports
World Wide Port Name of the Virtual Fibre
Channel.
Port status of Virtual Fibre Channel Port
LinkUp
LinkDown
WaitLinkUp
hfcmgr
version higher than or equal to 2.19, The OS Type and OS Version are
Normal operational status
FC cable is not plugged.
Port is now transiting from
Linkdown to Linkup.
SFP is hot swappable.
SFP is damaged.
SFP is unsupported.
SFP is not plugged.
Adapter is check-stopped
Normal Status
Cannot use the Virtual
Fibre Channel Port
Wait Linkup status
21
Advertisement
Table of Contents
