Table of Contents
Advertisement
[Detailed description]
Table Detailed description of hfcmgr –pb
No.
Item of display
1
Automap
2
Adapter information
WWPN
Device
3
Targeted information
TargetID
TargetWWPN
TargetWWNN
[Notes]
(1) After updating the set value using this command, in order to translate it into the driver,
reboot after updating the RAMDISK image by referring to "5.1 Notes on Updating the
RAMDISK Image".
(2) This command edits and displays the configuration information registered in /etc/hfcldd.conf.
The configuration information which the driver currently recognizes and is running can be
checked by displaying it with "4.5 Display Current Component".
(3) Please set the Persistent Binding setting "enable" to make effective the Persistent Binding
function. The following table shows the relation between the settings and the effectiveness
of Persistent Binding function.
Table effectiveness of Persistent Binding function
No.
Persistent Binding setting
1
Enable
2
3
Disable
4
Description
on/off
Need to turn off to use the persistent binding function.
Adapter WWPN
Logical device name
Target ID (0-255)
Target WWPN
Target WWNN
AutoMap setting
off
on
off
on
72
the effectiveness of Persistent Binding
function
effective
ineffective
Advertisement
Table of Contents
