Hitachi GVX-CC64GxBX series User Manual page 75

[Example 3]
Occasionally, the message below is displayed and the command exits, depending on the
status of the adapter. In such a case, wait a while and re-execute the command.
# ./hfcmgr -f all update <Backup File>
Time:20xx/11/27 19:16:47
hfcmcup Ver. 2.4.0.20 Copyright(C) 2003, 201x, Hitachi, Ltd.
>>>>>>>>>>>>>>> hfcldd0
hfcldd0 HITACHI FC Adapter
*** NOTICE *** NOTICE *** NOTICE ***
The microcode installation occurs while the
adapter and any attached drives are available
for use. It is recommended that this installation
be scheduled during non-peak production periods.
As with any microcode installation involving
drives, a current backup should be available.
Use 'y' to continue the installation.
Use 'n' or Ctrl-c to cancel the installation.
(Y/N) : y
--- The current microcode level for xxxxxx(hfcldd0)
--- Select microcode file: <Backup File>
File WWN=xxxxxxxx xxxxxxxx
Target WWN=xxxxxxxx xxxxxxxx
CURRENT SYSREV:xxxxxxxx
UPDATE SYSREV:xxxxxxxx
Update is OK?
(Y/N) : y
Adapter status busy. please try again later.
In case an update interruption
occurred, the hfcmgr command
displays an error message.
54