Scan All Ports To Hba Installed In System; Back Up Hba Bios Setup Data - Hitachi GVX-CC64GxBX series User Manual

Gigabit fibre channel adapter
Table of Contents

Advertisement

Scan all ports to HBA installed in system

It is necessary to know the logical device name of the adapter beforehand to set HBA
BIOS to each adapter.
Please move to directory (*) that installs the utility software, and execute the following
commands.
(*) Windows for HFCTools version 1.xx.xx.xx: :\ProgramFiles\Hitachi\drivers\hba
(:\Program Files (x86)\Hitachi\drivers \hba, for X86_64 and IA-64)
Windows for HFCTools version 4.xx.xx.xx: :\Program Files\Hitachi\drivers\hba
Linux: /opt/hitachi/drivers/hba
Windows:
# hfcbios –o devshow
Linux:
# ./hfcbios –o devshow
In the following, we show the execution example in Windows.
# hfcbios -o devshow
hfcbios Ver. X.X.X.X Copyright(C) 2006. Hitachi, Ltd.
+---------+----------+-----+-----+-----+------------------+------------------+
DEVICE
DEVICE
ID
+---------+----------+-----+-----+-----+------------------+------------------+
scsi4
30091054
+---------+----------+-----+-----+-----+------------------+------------------+
logical device name
(1) Compare displayed ORIGINAL WWN to WWPN (white seal) described on the
adapter, and acquire a corresponding logical device name.
(2) The PCI bus number, the device number, and the function number of the logical
device are needed to reflect the HBA BIOS setup data for the adapter in Windows.

Back up HBA BIOS setup data

Backs up various setup data of HBA BIOS.
Please move to directory that install the utility software, and execute the following
commands. It displays the HBA BIOS setup data being set now, and please back up
HBA BIOS setup data after confirming set values with "Table setup items and values". (*)
(*)There is a possibility that correct data cannot be acquired in the adapter that does not
work normally when executing it. Please note that there is a possibility that the adapter
does not work normally when the data is restored.
Windows:
# hfcbios [-c] {-d logical device name | -a} –o backup –f stored directory
Linux:
# ./hfcbios [-c] {-d logical device name | -a} –o backup –f stored directory
PCI
PCI
PCI
FC
BUS# DEV# FUNC# WWN
2
0
0
500008700030000A
125
ORIGINAL
WWN
500008700030000A

Advertisement

Table of Contents
loading

Table of Contents