Table of Contents
Advertisement
Abnormal heat, smoke, abnormal noise, or abnormal smell
Should you find anything abnormal occurred, turn off the power and unplug all the
power cords of the equipment (maximum of 5) from the electrical outlets. Using
the power cord after such occurrences may lead to electric shock or fire.
Do not place any objects around the electrical outlet to allow users to unplug the
power cord immediately.
Do not repair, remodel or disassemble
Do not attempt to repair, remodel or disassemble the equipment on your own,
except for expansion work to be performed in accordance with the instructions in
this manual. Work performed by unqualified persons may lead to electric shock,
fire, or burns. There are many high-voltage areas inside the power unit. It might
be hazardous if you touch these areas.
Insertion of foreign objects into the equipment
Do not allow clips, pins or any other metal items or flammable items to enter the
equipment through a vent or by any other means. Continuing to operate the
equipment with foreign objects may lead to electric shock or fire.
Removal of cover or bracket
Unless otherwise instructed, turn off the power, unplug all
power cords of the equipment from the electrical outlets, and
disconnect all cables from the equipment before removing
covers or brackets. Even if you turn off the power to the
equipment, some circuits are live and unexpected contact may
cause a fire.
Do not use the equipment with the cover removed. It may also
result in electric shock or equipment failure.
Handling of the power outlet
Use a grounding 2-pole plug-in power outlet. Outlets of any
other types would cause electric shock or fire.
In order to prevent electric shock, use a ground wire to connect
the outlet is grounding electrode to a ground terminal installed
by a qualified electrician. Omission of this connecting step may
cause electric shock in the event of a power failure.
Do not place objects on the equipment
Do not place a vase, potted plant or any other container with water in it or small
metal items like pins and clips on the equipment. Operating the equipment with
conductive objects such as mentioned above may lead to electric shock, smoke,
or fire.
Handling of heavy loads
The equipment is heavy. Be careful when moving it. Otherwise,
handling of this equipment may hurt your arms or lumbar.
To move or lift heavy loads such as this product, use tools or
perform the task with the help of at least one other person.
Otherwise, handling of heavy loads could cause injury.
WARNING
xii
Advertisement
Table of Contents
