Table of Contents
Advertisement
(*1) For this option, prease refer to the Notice in the section "List of Commands".
(*2) This option is not supported in RHEL6 or later.
(*3) This option does not allow to assign logical device name.
Perf Option is only changeable in Windows 2008 or Windows 2008 R2.
In Windows 2003, the value of perf option is "disable", and cannot be set to "enable".
In Windows 2012 or later, the value of perf option is "enable", and cannot be set to "disable".
(*4) This parameter can be set for all ports by using a command-line parameter "-p all",
instead of "-p <logical-device-name>". Though the activated parameter value for all ports are
not displayed, so a logical device name should be specified to check the activated parameter
value for the each ports.
(*5) In Windows 2012 or later, the value of this option is fixed to 0 second and cannot be
changed.
(*6) This option can be set on Windows2012 or later.
(*7) The newly changed parameter can be activated by "Virtual Fibre Channel Activation"
feature without rebooting the system.
(*8) The displayed message depends on a version.
[Linux]
hfcmgr version
lower than or equal to
8.8
8.9 or later
[Windows]
hfcmgr version
lower than or equal to
8.9
8.10 or later
(*9) This option is not supported in the following versions:
- Linux
: version lower than or equal to 8.8
- Windows : version lower than or equal to 8.9
(*10) When parameter value is changed, 16Gbps FC-HBA does not require system reboot to
activate the parameter value. Other FC-HBAs require system reboot to activate the
parameter value.
(*11)The configuration value of 64, 126, 256(MB) is only supported in Windows HFCTools
version 1.0.4.92 or later.
(*12)This option is only supported int Windows 2016 or later.
(*13)The parameter of msi is not supported in Windows.
(*14) This option is not supported in the following versions:
- Linux
: version lower than or equal to 9.17
"displayed message"
"log in target filter 16G"
"log in target filter Ext"
"displayed message"
"log in target filter 16G"
"log in target filter Ext"
31
Advertisement
Table of Contents
