Table of Contents
Advertisement
hfcmgr response messages
The table below displays the result code of hfcmgr command and response messages.
If hfcmgr is used on Windows, check the version combination of the utility and the driver are
supported. If they are used in unsupported combination, hfcmgr command does not work
properly and appropriate message may not be displayed. Refer to 'Windows driver and its utility
software version' table in HITACHI Gigabit Fibre Channel Adapter USER'S GUIDE (Support
Matrix Edition) for supported combinations.
List of the hfcmgr command response messages
No.
Response message
1
Success.
2
No such <Device>.
3
Invalid parameter value.
4
Command syntax error.
(command help -h option)
5
Input data is not numeral.
6
Input data is out of range.
7
Input wwn is illegal.
8
Input option is not support
operation.
(delete, {all|<Device>})
9
Unused
10
Input option is not support
operation.
(<Device>). [Windows]
11
Unused
12
Other error.
13
No such directory.
Description
Successfully terminated
No assigned logical device name existing
Check the logical device name.
Illegal assigned parameter value
Check the parameter value.
Command syntax error
Check the syntax.
Other than the numerical value assigned in the
numerical value assigning field
Check the syntax.
Assigned parameter value outside the range
Check the range of the parameter value
assigned.
Illegal WWN assigned
Check the number of digits and numerical
value of WWN.
Assigned option unsupported
With the assigning option, Assign Delete,
Assign All and Assign the Logical Device
Name are not supported. Check with this guide
-
Assigned option is not applicable in single port
settings. Specify 'all' to apply parameters to all
HBA adapters.
-
Another error occurred.
No assigned directory existing
Check if the directory exists.
92
Terminating
code
0
1
2
3
4
5
6
7
8
8
9
【Windows】9
【Linux】10
【Windows】10
【Linux】11
Advertisement
Table of Contents
