Table of Contents
Advertisement
CLI mode: Display Auto Map Parameter
You can confirm Automap parameter stored in /etc/modules.conf on RHEL3 or
/etc/modprobe.conf on RHEL4.
# hfcddutil -i
# hfcddutil --dspamp
[Example]
Auto Map Parameter (in /etc/modules.conf):
hfc_automap=1 (Automap On)
[Display/Set items]
No
hfc_automap
1
0
2
1 (default)
3
It is not yet set.
Meaning
Auto map is disabled. Persistent binding feature becomes
effective.
Auto map is enabled. Persistent binding feature doen not
become effective.
Auto map parameter is not set in /etc/modules.conf. Auto
map is enabled.
117
Advertisement
Table of Contents
