Set Hba Bios Parameters - Hitachi GVX-CC64GxBX series User Manual

Set HBA BIOS parameters

Set various parameters of HBA BIOS setup data.
Please move to directory (*) that installs the utility software, and execute the following
commands.
(*) Windows for HFC Tools version 1.xx.xx.xx: :\ProgramFiles\Hitachi\drivers\hba
(:\Program Files (x86)\Hitachi\drivers \hba, for X86_64 and IA-64)
Windows for HFCTools version 4.xx.xx.xx: :\Program Files\Hitachi\drivers\hba
Linux: /opt/hitachi/drivers/hba
Windows:
# hfcbios [-c] -d logical device name –p parameter=specified value
Linux:
# ./hfcbios [-c] -d logical device name –p parameter=specified value
parameter: Specifies the parameter of "Table Setup items and values".
specified value: Specifies a value from "Specified range" of "Table Setup items and
When you specify two or more values, you have to enclose them with " and
(ex. –p boot_device="1,5000087000302222,FF")
-c: Skips the confirmation of Y/N.
In the following, we show the execution example in Windows.
# hfcbios -d scsi4 -p bios=enable
hfcbios Ver. X.X.X.X Copyright(C) 2006. Hitachi, Ltd.
Current Configure : scsi4
HBA BIOS
Setup Configure
HBA BIOS
Setup is OK?
(Y/N) : y
Setup was successful.
Need reboot the system to update this.
values".
insert "," between values.
: ENABLE
: scsi4
: ENABLE
132