Table of Contents
Advertisement
In the following, we show the execution example in Windows.
# hfcbios -d scsi4 -o restore -f c:\30091054.02.00.00.00.BK
hfcbios Ver. X.X.X.X Copyright(C) 2006. Hitachi, Ltd.
Backup Data
+----------+------+---------+-----------+------------------+
DEVICE
ID#
+----------+------+---------+-----------+------------------+
30091054
+----------+------+---------+-----------+------------------+
Setup Configure
HBA BIOS
・
・
・
Restore is OK?
(Y/N) : y
Setup succeeded.
Need reboot the system to update this.
Apply HBA BIOS setup data
Apply various setup data of HBA BIOS. Currently this command is not available on Linux.
Windows:
(1) Select "Start", "Control Panel" and "system" from the desktop.
(2) Select the "Hardware" tab and click "Device Manager".
(3) Double click "SCSI and RAID controllers" then make sure that "Hitachi PCI Fibre Channel
Adapter" is present.
PCI
PCI
PCI
BUS#
DEVICE#
FUNCTION#
2
0
: scsi4
: ENABLE
ORIGINAL
WWN
0
500008700030000A
127
Advertisement
Table of Contents
