Table of Contents
Advertisement
Allocate the adapter number
You have to allocate the adapter number beforehand when setting driver parameters
or using Persistent Binding feature. This setting is registered in /etc/modules.conf.
[Example]
An adapter number 0 is allocated to the adapter port whose World Wide Port Name is
50000870 00300130.
--------------------------------------------------------------
Hitachi HBA Utility for Linux. Version 2.0.1.20 (3/17/2006)
Copyright (c) 2004-2006, Hitachi Ltd.
--------------------------------------------------------------
Main Menu
---------
1 . Display Current Component
2 . Display Auto Map Parameter
3 . Set Auto Map Parameter
4 . Display HBA Adapter Number
5 . Modify HBA Adapter Number
6 . Display Current Persistent Bindings
7 . Modify Persistent Bindings
8 . Display HBA Parameters
9 . Set HBA Parameters
99. Exit
Enter number => 5
Modify HBA Adapter Number:
1 . Specify the Adapter Number to HBA
2 . Delete HBA Adapter Number
99. Cancel
Enter number => 1
<Display Current Component>
Adapter: 00, WWPN: 5000087000300130
Adapter: 00, Target: 000, WWPN: 50060e8000427810
Adapter: 00, Target: 000, WWNN: 50060e8000427810
Adapter: 00, Target: 001, WWPN: 50060e8000427811
Adapter: 00, Target: 001, WWNN: 50060e8000427811
Adapter: 01, WWPN: 5000087000300020
Adapter: 01, Target: 000, WWPN: 50060e8000427810
Adapter: 01, Target: 000, WWNN: 50060e8000427810
Adapter: 01, Target: 001, WWPN: 50060e8000427811
Adapter: 01, Target: 001, WWNN: 50060e8000427811
Adapter Number ( 0-63, X to Cancel ) => 0
Adapter World Wide Port Name (exp. 500008a00030114e) => 5000087000300130
Adapter Number - World Wide Port Name (in /etc/hfcldd.conf):
00
Adapter Number ( 0-63 X to Cancel ) =>
- 5000087000300130
105
Advertisement
Table of Contents
