Hitachi GVX-CC64GxBX series User Manual page 132

 Isolate or recover adapter port
Isolate or recover adapter port when replace SFP transceiver while system is running.
Refer to 'Hitachi Compute Blade system user's guide' for how to replace SFP.
Display SFP information
You can confirm SFP information selecting 'Select SFP Operations'-'Display SFP
Information'.
--------------------------------------------------------------
Hitachi HBA Utility for Linux. Version 1.0.2.65 (06/17/2009)
Copyright (c) 2004-2009, Hitachi Ltd.
--------------------------------------------------------------
Main Menu
---------
1 . Display Current Component
2 . Display Auto Map Parameter
3 . Set Auto Map Parameter
4 . Display HBA Adapter Number
5 . Modify HBA Adapter Number
6 . Display Current Persistent Bindings
7 . Modify Persistent Bindings
8 . Display HBA Parameters
9 . Set HBA Parameters
10. SFP Transceiver Replacement
99. Exit
Enter number => 10
Select SFP Operations:
1 . Display SFP Information
2 . Isolate SFP
3 . Recover SFP
99. Cancel
Enter number => 1
Device: hfcldd0 WWPN: XXXXXXXXXXXXXXXX
SFP Part Number
Serial Number : yyyyyyyyyyyyyyyy
Date Code
Transceiver Replacement : not replaceable
Select SFP Operations:
1 . Display SFP Information
2 . Isolate SFP
3 . Recover SFP
99. Cancel
Enter number =>
: xxxxxxxxxxxxxxxx
: zzzzzzzz
111
Status: LinkUp