CLI mode: Set Auto Map Parameter
You can set Auto Map Parameter in /etc/modules.conf on RHEL3 or
/etc/modprobe.conf on RHEL4
When you register persistent binding information, you have to set Auto Map parameter
disabled. Then update RAMDISK image.
# hfcddutil –j [value]
# hfcddutil --setamp [value]
[Display/Set items]
No
Meaning
[value]
0: Automap Off, 1: Automap On
(4) Please set the Persistent Binding setting "enable" to make effective the Persistent Binding
function. The following table shows the relation between the settings and the Effectiveness
of Persistent Binding function.
Table Effectiveness of Persistent Binding function
No.
Persistent Binding setting
1
Enable
2
3
Disable
4
AutoMap setting
off
on
off
on
118
the Effectiveness of Persistent Binding
function
effective
ineffective