Table of Contents
Advertisement
The parameters with a character "N" in the "Reboot required" column
If the parameters with symbol "N" in the "Reboot required" column are changed, a message
below is displayed and the new parameter becomes effective in Hitachi Fibre Channel Adapter
driver without reboot.
【Linux】RAMDISK images has to be updated to make the parameters effective after OS
reboot.
#./hfcmgr -p all lm disable
Time:xxxx/xx/xx xx:xx:xx
Reflection to driver operation is started.
<Device>: Since the force default parameter is set up, a driver parameter is not
changed.
Reflection to driver operation is ended.
This message is displayed when an error is occurred and the
Succeeded.
parameter is not reflected in the working driver. Even if this message is
#
displayed; the parameters in /etc/hfcldd.conf in Linux or Registry of
Windows are modified.
# Error message
<Device>: Since the force default
1
parameter is set up, a driver parameter
is not changed.
<Device>: HFCAPI xxxx xxxx (This error
2
code may be different depending on the
cause of the error).
Meaning
ForceDefaultParameter is enabled so
the driver parameter is not changed.
For details, refer to "
Display or Set the Boot Information".
Other error is occurred. Re-execute
the command after a while.
32
Advertisement
Table of Contents
