Table of Contents
Advertisement
6
hfcbios
After OS starts, you can set various setup parameters of HBA BIOS with the hfcbios command.
You cannot use the hfcbios command on the LPAR manager.
Set various setup parameters from the EFI driver which operates on LPAR manager. Refer to
HITACHI Gigabit Fibre Channel Adapter USER'S GUIDE (BIOS/EFI Edition) for details.
Function list
(1) Scan all ports of adapters installed in the system
(2) Back up HBA BIOS setup data
(3) Restore HBA BIOS setup data
(4) Confirm HBA BIOS setup data
(5) Apply HBA BIOS setup data in the system.
(6) Set HBA BIOS setup parameters
Preparation
(1) Login the system for Windows in "Administrator authority". Login the system for
Linux in "root".
(2) Please confirm other utility software or the applications are not started. Please stop
everything when starting.
(3) It is necessary to execute the operation based on "Apply HBA BIOS setup data in
the adapter" or to reactivate the system after HBA BIOS is set up.
(4) Please execute the backup of the HBA BIOS setup data beforehand.
124
Advertisement
Table of Contents
