Table of Contents
Advertisement
Moreover, you have to set "Set Auto Map Parameter" to make this function effective.
Please note that the persistent binding information set on /etc/hfcldd.conf does not
become effective during Automap is enabled.
The value of Automap can be confirmed by "Display Auto Map Parameter".
--------------------------------------------------------------
Hitachi HBA Utility for Linux. Version 2.0.1.20 (3/17/2006)
Copyright (c) 2004-2006, Hitachi Ltd.
--------------------------------------------------------------
Main Menu
---------
1 . Display Current Component
2 . Display Auto Map Parameter
3 . Set Auto Map Parameter
4 . Display HBA Adapter Number
5 . Modify HBA Adapter Number
6 . Display Current Persistent Bindings
7 . Modify Persistent Bindings
8 . Display HBA Parameters
9 . Set HBA Parameters
99. Exit
Enter number => 3
Select Automap Method:
1 . Automap On
2 . Automap Off
99. Cancel
Enter number => 2
Auto Map Parameter (in /etc/modprobe.conf):
hfc_automap=0 (Automap Off)
Return to Main Menu =>
108
Advertisement
Table of Contents
