Table of Contents
Advertisement
[Notes]
(1) You need to reboot the system to activate the changes after the set command is
successfully executed.
(2) This "hfcmgr -b" command cannot be used if operating on the LPAR manager of Hitachi
Server Virtualization Mechanism".
(3) FLASH-ROM data is updated when you set parameters. While the command is being
executed, do not close the operation Window, terminate the command forcibly, or perform
operations such as turning off the power of the server unit or rebooting. The FLASH-ROM
data may be destroyed and HBA becomes unavailable.
(4) If hfcmgr version 8.0 to 8.7 is used, it might not displays Additional WWPNs stored on the
FLASH-ROM.
50
Advertisement
Table of Contents
