Table of Contents
Advertisement
Reflect driver parameter to the new
Adapter when hot-plugging
hfcmgr higher than or equal to version 8.0
[Function] This command reflects the parameter settings explained at "Display or Set the Port
Information" from the old hot-removed Adapter to the new hot-added Adapter. For details on
hot-remove or hot-add Adapter, refer to the section "" in "HITACHI Gigabit Fibre Channel
Adapter USER'S GUIDE (Linux/VMware Driver Edition)".
[Syntax]
hfcmgr –ar {<logical device name>|all} [force]
force
# Omit the (y/n) confirmation message at time of delete
"All" refers to assigning by the host unit (Refer, set or delete is the common setting
value across all the adapter ports)
[Example] Reflect driver parameter to the new hot-plugged adapter
# ./hfcmgr -ar all
Adapter parameters are re-read.
Do you execute? (y/n) > y
Time:xxxx/xx/xx xx:xx:xx
Succeeded.
#
67
Advertisement
Table of Contents
