Table of Contents
Advertisement
(Step 2) Set QueueDepth of hfcldd0 to 20.
Figure Sample of separate setting of hfcmgr –p port
# ./hfcmgr -p hfcldd0 qd 20
Time:xxxx/xx/xx xx:xx:xx
Succeeded.
You need reboot system after remake a ramdisk image to reflect parameter changes
to the system.
# ./hfcmgr -p hfcldd0
:
Queue Depth
:
#
(Step 3) Set Queue Depth to 10 by the common setting across all the adapter ports (assign
"all").
Figure Sample of hfcmgr –p all setting
# ./hfcmgr -p all qd 10
Time: xxxx/xx/xx xx:xx:xx
Succeeded.
You need reboot system after remake a ramdisk image to reflect parameter changes to the
system.
# ./hfcmgr -p all
Time: xxxx/xx/xx xx:xx:xx
---------------------------------------
Common Setting of All HBA port
---------------------------------------
Max Transfer Size
: -
Link Down Time
: -
Reset Delay Time
: -
Preferred AL-PA
: -
Reset Timeout
: -
Abort Timeout
: -
Queue Depth
: 10
Machine Check
: -
Allowed
: -
Target Reset Mode
LUN Reset Delay
Interrupt Type
: -
Logging Mode
: -
Login Target Filter : -
#
(Step 4) Reboot after updating the RAMDISK image.
: 32 (20)
: -
: -
45
20 is set but driver is still operating on 32.
Advertisement
Table of Contents
