Power Supply Options - Intermec CV41 User Manual

Power Supply Options

DRAFT
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
To use the CV41, you must apply power to it. By default, the CV41
comes with a DC power cable that connects directly to a forklift battery
running 10-60 VDC power. Other power supply options include:
6-96 DC/DC Power Supply
•
• AC/DC Power Supply
The AC/DC power supply must be connected to a 120 V, 60 Hz supply
in North America, or to a 230 V, 50 Hz power supply outside of North
America (appropriate AC cable not included). Make sure that the
external AC power is properly grounded and provides a maximum of
15 A of overcurrent protection (10 A for 230 V circuits). For more
information on installing any of these power supply options, see the
CV41 Vehicle Mounting Kit Reference
Note: In North America, the AC power supply is intended for use with
a UL Listed ITE power supply with an output rating of 12 to 48 VDC,
minimum 15 W. Outside of North America, the power supply is
inteded for use with an IEC certified ITE power supply with an output
rating of 12 to 48 VDC, minimum 15 W.
Chapter 1 — About the Computer
Guide.
5