Intermec CV41 User Manual page 83

Problems With the Wi-Fi Connection (Continued)
Problem
The computer is connected to the network
and you move to a new site to collect data.
Your computer now shows you are not
connected to the network.
The computer appears to be connected to
the network, but you cannot establish a
terminal emulation session with the host
computer.
The computer appears to be connected to
the network, but the host computer is not
receiving any information from the
computer.
A network connection icon appears in the
toolbar, but then disappears.
DRAFT
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Chapter 5 — Troubleshoot and Maintain the Computer
Solution
Move closer to an access point or to a different location
to reestablish communications until you reconnect
with the network.
There may be a problem with the host computer, or
with the connection between the access point and the
host computer. Check with the network administrator
to make sure the host is running and allowing users to
log in to the system.
There may be a problem with the connection between
the access point and the host computer. Check with the
network administrator or use your access point user's
manual.
The computer may not be communicating with the
intended access point. Make sure the network name
matches the access point network name.
The access point may not be communicating with the
server. Ensure the access point is turned on, properly
configured, and has 802.1x security enabled.
69