Troubleshoot 802.1X Security; Check 802.11 Network Status - Intermec CV41 User Manual

Chapter 5 — Troubleshoot and Maintain the Computer

Troubleshoot 802.1x Security

Problems With 802.1x Security
Problem
The computer indicates it is not
authenticated.
You receive a message saying "The
server certificate has expired or
your system date is incorrect"
after you perform a clean boot on
the computer.

Check 802.11 Network Status

DRAFT
70
Use the following table to troubleshoot problems with your 802.1x
security that will prevent you from connecting to your network, such
as an incorrect password.
Solution
Make sure that:
•
the User Name and Password parameters on the computer
must match the user name and password on authentication
server. You may need to reenter the password on both the
computer and authentication server.
•
on your authentication server, the user and group are
allowed and the group policy is allowed to log into the
server. For help, see the documentation that shipped with
your authentication server software.
•
the IP address and secret key for access point must match the
IP address and secret key on the authentication server. You
may need to reenter the IP address and secret key on both
your access point and authentication server.
•
the authentication server software is running on the server
PC.
Date and time are not saved when you perform a clean boot.
Reenter the date and time, and then save your changes.
If you have trouble connecting to your 802.11 wireless network:
• Make sure you have correctly set network parameters on the
computer.
• Check your wireless security settings.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide