Clean Boot the Computer
Disconnect the UPS Battery
DRAFT
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
In some cases where the computer completely stops responding, it may
be necessary to perform a clean boot. Because clean booting may result
in data loss, use this method only if all other recovery methods have
failed. This returns the computer back to its factory default settings.
Note: Clean booting the device erases all files in the ObjectStore
including any file or registry changes. Any files that are present in the
\System folder are preserved.
1 Tap Start > Settings > Control Panel > Registry.
2 Tap the Load Factory Defaults button.
If the CV41 stops responding, or you plan on shipping the CV41, you
need to disconnect the UPS battery.
1 Remove the CV41 from the smart dock. For help, see
CV41 from the Smart Dock" on page
2 Using a Phillips head screwdriver, remove the two screws that
secure the SIM card access panel.
Chapter 5 — Troubleshoot and Maintain the Computer
"Remove the
8.
77