Using The Vehicle Power Install Kit; What You Need; What You Need To Do - Intermec 203-802 Series Installation Instructions Manual

Using the Vehicle Power Install Kit

The vehicle power install kit (P/N 203-802-xxx) lets you connect
an Intermec computer, printer, and/or other equipment to the
electrical system of your vehicle. After you install this kit, your
vehicle can provide power to operate a vehicle dock, printer, and
all other connected equipment. It will also charge the internal
battery of both the computer or the printer.
Note: For help installing the vehicle dock with other equipment,
contact your local Intermec representative.
This kit contains all of the hardware necessary to connect the
battery cable directly to the vehicle battery. This direct
connection reduces installation problems and allows for
improved vehicle battery filtering.

What You Need

•
•
•
•
•

What You Need To Do

1 Determine your vehicle's voltage level.
2 Install the power cable.
These instructions describe how to perform each step.
Vehicle Power Install Kit Installation Instructions
Common hand tools, such as a wrench
Wire crimping and stripping tool
Electric drill and drill bits
Voltmeter
Cable clamps or wire-ties
5