Replace The Fuse - Intermec CV41 User Manual

Chapter 5 — Troubleshoot and Maintain the Computer

Replace the Fuse

DRAFT
78
3 Press the UPS Battery Disconnect button located below the SIM
card slot.
4 Reinstall the SIM card access panel and tighten the screws to a
torque to a value of 4-5 in/lbs.
Once power external power is reconnected to the CV41, the UPS
battery automatically reconnects.
The CV41 uses a 10 A time delay (slow blow) fuse, which is located on
the smart dock. If you need to replace the fuse, make sure that you
replace it with the same size, rating, and type of fuse (Littelfuse 03260
10 MXP or equivalent).
1 Remove the CV41 from the smart dock. For help, see
CV41 from the Smart Dock" on page
2 Disconnect the smart dock from power.
3 Using a flathead screwdriver, remove the fuse holder from the
CV41.
4 Replace the fuse.
5 Secure the fuse holder back into the CV41.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
"Remove the
8.