Hide Menu Items In Intermec Settings; Use Intermec Settings Remotely With Smartsystems Foundation - Intermec CV41 User Manual

Chapter 4 — Configure the Computer

Hide Menu Items in Intermec Settings

Use Intermec Settings Remotely With
SmartSystems Foundation
DRAFT
48
You can hide items in the Intermec Settings menus if you do not want
them available for other users to access. Hidden items are not saved
when you back up your settings in the SmartSystems console.
On the computer, you can:
• hide menu items by tapping and holding the item, and then
choosing Hide Menu Item from the popup list. When asked if you
want to hide the menu, tap Yes.
• restore all hidden items in all menus, by tapping Menu > Unhide
All Items.
Note: When you restore default settings in Intermec Settings, only the
settings for visible items are restored to defaults. The settings for
hidden menu items are not affected.
Your computer is SmartSystems-enabled, which lets you open
Intermec Settings from the SmartSystems console to remotely
configure all of your computers. For more information on
SmartSystems, see "Manage the Computer Using SmartSystems
Foundation" on page
1 In the SmartSystems console, select a computer and right-click.
2 From the menu, select Start Intermec Settings.
3 Configure the settings you need to change. As you choose
parameters from the tree structure, help for each parameter
appears in the upper right pane of Intermec Settings.
4 When you are done making changes, choose File > Save Settings.
For help using Intermec Settings, click Help > Contents. For
information on all of the parameters in Intermec Settings, see the
Intermec Settings Command Reference
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
34.
Manual.