How To Configure The Computer; Use Intermec Settings On The Computer - Intermec CV41 User Manual

Chapter 4 — Configure the Computer

How to Configure the Computer

Use Intermec Settings on the Computer

DRAFT
40
You can configure many parameters on the computer such as the bar
code symbologies it decodes or the network settings. The values you
set for these parameters determine how the computer operates.
There are several ways to configure the computer:
• Directly on the computer. You can use Intermec Settings directly
on the computer to change only the settings on that computer. For
more information, see the next section..
• Remotely using Intermec SmartSystems Foundation. When you
use SmartSystems, you can remotely configure all of your CV41
vehicle mount computers as well as other SmartSystems-enabled
Intermec computers and peripherals. For more information, see
"Use Intermec Settings Remotely With SmartSystems
Foundation" on page
• You can use a third-party device management product that
supports the computer and Intermec Settings, such as Soti
MobiControl or Wavelink Avalanche. For more information, visit
the Device Management
You can also configure the computer with configuration bundles that
you create using SmartSystems Foundation. For more information,
see the SmartSystems Foundation Online Help.
Use Intermec Settings to configure parameters for Intermec
applications on the computer as well as some device-specific
parameters like volume. You can configure parameters for important
functions like data collection and communications.
External bar code scanners are supported by connecting the scanner to
a COM port or by Bluetooth. When configuring a scanner using
Intermec Settings, the scanner symbologies can be updated through
the CV41 data collection software.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
48.
page on the Intermec website.