Enable The Defroster; Change The Volume - Intermec CV41 User Manual

Enable the Defroster

Change the Volume

DRAFT
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
If your CV41 contains a defroster, use it to help reduce condensation
on an external surface when the computer is moving between
sub-freezing and normal temperatures.
1 Tap Start > Control Panel > Screen. The Screen Control screen
appears.
2 Select Enable Defroster.
3 In Screen heater, select Enabled.
4 In Trip Point, set the temperature tripping point in degrees
Celsius. When the temperature reaches the trip point, the heater
automatically turns on.
5 Tap OK.
The CV41 can make sounds when you tap the screen or use an attached
scanner. You can change the CV41 volume to suit your needs and the
environment.
1 On the keypad, tap ALT to enable the secondary keys.
2 Tap F9 to increase volume or F10 to decrease the volume.
3 Repeat Steps 1 and 2 to increase or decrease volume.
Chapter 1 — About the Computer
19