About the Mounting Kits Mount the smart dock to a vehicle with an Intermec mounting kit to restrain and isolate the computer from shocks and vibrations that may potentially damage it. After you mount the smart dock, attach the CV41 to it.
To mount the smart dock to a vehicle 1 Select a mounting location. 2 Attach a flat base to the smart dock using the four screws and washers provided. (x4) CV41 Vehicle Mounting Kit Reference Guide...
Page 5
0.95 - 1.10 N/m (17-20 in/lb). For large beams, you may need to supply your own hardware. (x2) CV41 Vehicle Mounting Kit Reference Guide...
Note: If you are connecting the 6-96 DC/DC converter kit, use Universal Power Supply Instructions to learn how to connect it to your forklift. CV41 Vehicle Mounting Kit Reference Guide...
Cable clamps or wire-ties Wire crimping and stripping tools • • 10 A maximum time-delay (slow-blow ) high-interrupting rated fuse. For North America, use a UL listed fuse. • Electric drill and drill bits CV41 Vehicle Mounting Kit Reference Guide...
All manuals and user guides at all-guides.com Install the 10-60 VDC Power Cable Before you install the power cable, make sure that the CV41 is not attached to the smart dock, and the power switch on the dock is in the off position.
All manuals and user guides at all-guides.com 6 If you have a CV41 running Windows Embedded Standard: a Tap Start > Control Panel > AutoOn. b Select a startup behavior. Tap OK. If you have a CV41 running Windows CE: a Tap Start >...
Attach the CV41 to the Smart Dock After you mount the smart dock and supply power, you can attach the CV41 and turn on the computer. To attach the CV41 to the smart dock 1 Make sure that the computer is turned off.
Page 11
All manuals and user guides at all-guides.com 7 Press the Power button on the smart dock forward (towards the CV41) to turn on the dock. 8 Press the Power button on the CV41 to turn it on. CV41 Vehicle Mounting Kit Reference Guide...