Chapter 4 — Configure the Computer
Configure Bluetooth Communications
DRAFT
50
2 Select the Radio Enabled check box and tap OK. By default, the
computer uses Wireless security and enables DHCP.
3 Use Intermec Settings to configure any other parameters you need
to use for communication with your network.
4 Configure 802.11 security. For help, see
Security" on page
Your computer is Bluetooth™-enabled, which lets you connect to
other Bluetooth devices, such as scanners or printers.
The Bluetooth radio needs to be on before you can discover and
connect to other Bluetooth devices. By default, the radio is turned on.
You can configure Bluetooth communications using Intermec
Settings or from the Start menu.
1 From the Intermec Settings main menu, tap Communications >
Bluetooth.
2 Select the on check box.
3 Tap OK.
The Bluetooth radio maintains its state through a reboot or cold
boot and maintains virtual COM ports. But, if you clean boot your
computer you need to recreate pairings to devices.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
56.
"About Wireless