Intermec CV41 User Manual page 78

Chapter 4 — Configure the Computer
DRAFT
64
Configure 802.1x Security with Microsoft
Use the following procedure to configure 802.1x security with
Microsoft security. Intermec recommends that you use WPA2-802.1x
instead of 802.1x-WEP if possible.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose Open.
6 For Data Encryption, choose WEP.
7 For 802.1X Authentication, choose TLS or PEAP.
8 If you choose TLS:
a Load a user and root certificate on your computer. For help, see
"Load a Certificate" on page
b Choose Properties. The Certificates dialog box appears.
c Select the certificate you want to use from the list. The User
Logon dialog box appears.
d Enter a User Name and Domain and tap OK.
e Tap OK to exit the Certificates dialog box.
f Tap OK to save the Microsoft Security settings.
9 If you choose PEAP:
a Load a root certificate of the authentication server on your
computer. For help, see
b Tap OK to save the security settings and the User Logon dialog
box appears.
c Enter a User Name, Password, and Domain. Select Save
Password if you want to save the password for future
authentication sessions.
d Tap OK to save the Microsoft Security settings.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
66.
"Load a Certificate" on page 66.