Intermec CV41 User Manual page 76

Chapter 4 — Configure the Computer
DRAFT
62
Select Microsoft Security
Use the following procedure to select Microsoft security.
1 Start Intermec Settings. For help, see
on page 41.
2 Choose Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security. An alert
box appears telling you that you must save your settings and reboot
the computer for the new security choice to take effect.
4 Tap Yes. The computer resets and starts with Microsoft Security as
the Security Choice.
Configure WPA or WPA2 Enterprise (802.1x) Security With
Microsoft
Use these procedures to set WPA-802.1x security on your computer
with Microsoft security.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA or WPA2. Data
Encryption automatically defaults to TKIP for WPA and AES for
WPA2.
6 For 802.1x Authentication, choose either TLS or PEAP.
7 If you choose TLS:
a Load a user and root certificate on your computer. For help, see
"Load a Certificate" on page
b Choose Properties. The Certificates dialog box appears.
c Select the certificate you want to use from the list. The User
Logon dialog box appears.
d Enter a User Name and Domain and tap OK.
e Tap OK to exit the Certificates dialog box.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
"Start Intermec Settings"
66.